Polaris Ranger Denali Pro UTV Snow Plow
Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.
Please Note: All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.
Kit Contents:
Blade Features:
- County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
- Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
- Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
- High strength, high yield 3/16 thick Grade 50 steel wear bar
- Angled Blade : 16 on the low side; 23 on the high side
- Rubber flap & stabilizer bar with rubber flap
- Height AND angle adjustable steel skid feet
- 3 Year Warranty
- Made in the USA
Push Tube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick release pins included
- 13.5 inches center to center for plow mount tabs
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
-
Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Optional Hydroturn Features:
-
PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
- Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle while driving; full radius turn in just 10 seconds
- Heavy duty chrome plated ¾″ cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3" x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
POLARIS MODEL MOUNT PART #:
MA11700
2009-2014 Polaris Ranger Full Size
2010-2014 Polaris Ranger Crew Full Size
Please Note: does NOT fit 2013-2017 Ranger XP900 (or Crew)
MA11701
2010-2014 Polaris Ranger 400
2017-2020 Polaris Ranger 500 Mid Size
2014-2021 Polaris Ranger 570 Midsize
2014-2021 Polaris Ranger 570 Crew Mid Size
2013-2014 Polaris Ranger 800 Midsize
2015-2017 Polaris Ranger ETX
2016-2020 Polaris Ranger 570 Full Size (Round ROPS / Round Tube Roll Cage)
MA11701_SD
Please Note: Includes Mount Plate, Hardware List, Installation Instructions. Hardware may not be included.
2010-2014 Polaris Ranger 400
2017-2020 Polaris Ranger 500 Mid Size
2014-2021 Polaris Ranger 570 Midsize
2014-2021 Polaris Ranger 570 Crew Mid Size
2013-2014 Polaris Ranger 800 Midsize
2015-2017 Polaris Ranger ETX
2016-2020 Polaris Ranger 570 Full Size (Round ROPS / Round Tube Roll Cage)
MA11704
2015-2017 Polaris Ranger 570 Full Size
2015-2017 Polaris Ranger 570 Crew Full Size
2016-2017 Polaris Ranger 570 XP 4x4 (Channel Tube Roll Cage)
2013-2021 Polaris Ranger XP900
2013-2021 Polaris Ranger XP900 Crew
2016-2021 Polaris Ranger XP900 High Lifter model
2017-2021 Polaris Ranger 1000 XP
2017-2021 Polaris Ranger 1000 XP Crew
2015-2018 Polaris Ranger 1000 Diesel
2016-2018 Polaris Ranger 1000 Diesel Crew
2019-2020 Polaris Ranger XP 1000 Northstar
MA11707
2002-2008 Polaris Ranger
2008-2009 Polaris Ranger Crew
MA11752
2021-2022 Polaris Ranger 1000 Premium & EPS models (requires Polaris front brushguard)
NOTE: mounts directly to the pushtube
NOTE: interference is possible when plow is turned at extreme angles
MA11770
2 inch Receiver Plow Mount
All machines with front 2 inch receiver already installed
