Polaris Ranger Denali UTV Plow
Polaris Ranger DENALI UTV Snow Plows are made to handle the toughest conditions and hold up against sand, snow and ice. With a 65 degree attack angle and over center design, the heavy duty plow blade ensures snow rolls up and is thrown forward. The central mounting position of the plow kit disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. Our easy-connect design makes for a quick attachment of the plow to your UTV for when the snow begins to fly. Then, when winter draws to a close, take the plow back off in a matter of minutes. The durable snowplow mount plate is specifically engineered to fit the frame of your UTV and can remain on your vehicle year round.
PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
Please Note: All of our DENALI Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend our VIPER Elite, VIPER Max, or VIPER Midnight winches.
Kit Contents:
- UTV Snow Plow Blade - Straight
- Pushtubes
- Wearbar
- Skid Feet
- Installation Hardware and Instructions
Blade Features:
- Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel
- Four 7 gauge ribs run the full height of the blade
- Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
-
65° attack angle and over center design ensures snow rolls up and is thrown forward
- Replaceable 7gauge steel wear bar included with every kit
-
Height and angle adjustable skid feet included
- 3 Year Warranty
Push Tubes and Lift Kit Features:
-
PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
-
Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 10 different angles - 0, 12.5°, 25°
-
Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
-
Quick Release Pins included
- 13.5 inches center to center for plow mount tabs
- Pushtube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
-
Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Optional Hydroturn Features:
-
PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
- Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle while driving; full radius turn in just 5 seconds
- Heavy duty chrome plated ¾″ cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3″ x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
POLARIS MODEL MOUNT PART #:
MA11700:
2009-2014 Polaris Ranger Full Size
2010-2014 Polaris Ranger Crew Full Size
Please Note: does NOT fit 2013-2017 Ranger XP900 (or Crew)
MA11701:
2010-2014 Polaris Ranger 400
2017-2020 Polaris Ranger 500 Mid Size
2014-2021 Polaris Ranger 570 Midsize
2014-2021 Polaris Ranger 570 Crew Mid Size
2013-2014 Polaris Ranger 800 Midsize
2015-2017 Polaris Ranger ETX
2016-2020 Polaris Ranger 570 Full Size (Round ROPS / Round Tube Roll Cage)
MA11701_SD:
Please Note: Includes Mount Plate, Hardware List, Installation Instructions. Hardware may not be included.
2010-2014 Polaris Ranger 400
2017-2020 Polaris Ranger 500 Mid Size
2014-2021 Polaris Ranger 570 Midsize
2014-2021 Polaris Ranger 570 Crew Mid Size
2013-2014 Polaris Ranger 800 Midsize
2015-2017 Polaris Ranger ETX
2016-2020 Polaris Ranger 570 Full Size (Round ROPS / Round Tube Roll Cage)
MA11704:
2015-2017 Polaris Ranger 570 Full Size
2015-2017 Polaris Ranger 570 Crew Full Size
2016-2017 Polaris Ranger 570 XP 4x4 (Channel Tube Roll Cage)
2013-2021 Polaris Ranger XP900
2013-2021 Polaris Ranger XP900 Crew
2016-2021 Polaris Ranger XP900 High Lifter model
2017-2021 Polaris Ranger 1000 XP
2017-2021 Polaris Ranger 1000 XP Crew
2015-2018 Polaris Ranger 1000 Diesel
2016-2018 Polaris Ranger 1000 Diesel Crew
2019-2020 Polaris Ranger XP 1000 Northstar
MA11707:
2002-2008 Polaris Ranger
2008-2009 Polaris Ranger Crew
MA11752:
2021-2022 Polaris Ranger 1000 Premium & EPS models (requires Polaris front brushguard)
NOTE: mounts directly to the pushtube
NOTE: interference is possible when plow is turned at extreme angles
MA11770:
2 inch Receiver Plow Mount
All machines with front 2 inch receiver already installed
